Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Delta · DVP Slim Series PLC
DVP26SE11T is a Delta 26I/O Network Type Advanced Slim PLC. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Total I/O | 26 |
|---|---|
| Supply voltage | 24 V DC (IEC 61131-2) |
| Rated speed | Higher execution speed compared to the competition: LD: 0.64μs, MOV: 2μs |
| I/O and communication | |
| Bus interface | Built-in Ethernet supports MODBUS TCP and Ethernet/IP |
| Mechanical | |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies DVP26SE11T as "26I/O network type advanced slim PLC". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP26SE11T. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
| Delta DVP Slim Series PLC variants | |||
| Catalog number | Supply voltage | ||
|---|---|---|---|
| DVP26SE11T (this page) | 24 V DC (IEC 61131-2) | ||
| DVP26SE11R | 24 V DC (IEC 61131-2) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The DVP26SE11T is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Delta DVP26SE11T — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number DVP26SE11T; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Which official Delta document defines DVP26SE11T?
The official Delta download-centre catalogue entry for this order number classifies DVP26SE11T as "26I/O network type advanced slim PLC". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP26SE11T. Use that document as the authority for ratings and installation conditions before ordering.
Q.What does the official Delta catalogue state about the point configuration of DVP26SE11T?
The official Delta download-centre record for DVP26SE11T describes this order number as "26I/O network type advanced slim PLC", so the specification table lists Total I/O = 26. Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP26SE11T
Q.Before ordering DVP26SE11T, which rated speed entry should be checked?
The rated speed entry quoted above is Higher execution speed compared to the competition: LD: 0.64μs, MOV: 2μs. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the bus interface data for DVP26SE11T?
It is listed in the specification table for Delta DVP26SE11T as Built-in Ethernet supports MODBUS TCP and Ethernet/IP. Check the revision of the installed unit if the catalog number has been superseded.
Q.For DVP26SE11T, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 61131-2) for Delta DVP26SE11T. Compare it with the nameplate of the installed unit before ordering.
Q.Can the DVP26SE11T replace the unit currently installed in my panel?
Compare catalog number DVP26SE11T and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for DVP26SE11T?
Send the full catalog number DVP26SE11T, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DVP26SE11T.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
