Delta · DVP Slim Series PLC
DVP02DA-S is a Delta Analog output module, 2 AO. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document DVP-0010230-01 (Installation Instructions, issued 2021-04-01), which classifies DVP02DA-S as "Analog output module, 2 AO". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP02DA-S. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP Slim Series PLC variants |
| Catalog number |
Supply voltage |
|
DVP02DA-S (this page) |
24 V DC (IEC 61131-2) |
| DVP02DA-E2 |
24 V DC (IEC 61131-2) |
| DVP01LC-SL |
24 V DC (IEC 61131-2) |
| DVP01PU-H2 |
24 V DC (IEC 61131-2) |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The DVP02DA-S is the I/O element in a Delta control installation. It terminates the field signals listed above and hands them to the controller, so field wiring and protective devices are sized to the ratings in the Specifications table, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVP02DA-S
Delta DVP02DA-S Analog output module, 2 AO. See the manufacturer product information for this catalog number.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about DVP02DA-S
Q.Which official Delta document defines DVP02DA-S?
The official Delta document DVP-0010230-01 (Installation Instructions, issued 2021-04-01) classifies DVP02DA-S as "Analog output module, 2 AO". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP02DA-S. Use that document as the authority for ratings and installation conditions before ordering.
Q.For DVP02DA-S, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Delta DVP02DA-S. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under operating temperature for catalog number DVP02DA-S?
The operating temperature entry in the table above still has to be confirmed against the original Delta manufacturer documentation for DVP02DA-S before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.How do I confirm compatibility of DVP02DA-S before ordering?
Match the catalog number DVP02DA-S and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for DVP02DA-S?
Send the full catalog number DVP02DA-S, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DVP02DA-S.