Delta · DVP Slim Series PLC
DVP-28SV11R2 is a Delta 28 I/O High Performance Slim PLC SV. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Total I/O |
28 |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies DVP-28SV11R2 as "28 I/O high performance slim PLC (SV2)". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP28SV11R2. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP Slim Series PLC variants |
| Catalog number |
Supply voltage |
|
DVP-28SV11R2 (this page) |
24 V DC (IEC 61131-2) |
| DVP-28V11T2 |
24 V DC (IEC 61131-2) |
| DVP-20SX11R |
24 V DC (IEC 61131-2) |
| DVP-20SX211R |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVP-28SV11R2 is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVP-28SV11R2
Delta DVP-28SV11R2 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number DVP-28SV11R2; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about DVP-28SV11R2
Q.Which official Delta document defines DVP-28SV11R2?
The official Delta download-centre catalogue entry for this order number classifies DVP-28SV11R2 as "28 I/O high performance slim PLC (SV2)". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP28SV11R2. Use that document as the authority for ratings and installation conditions before ordering.
Q.What does the official Delta catalogue state about the point configuration of DVP-28SV11R2?
The official Delta download-centre record for DVP-28SV11R2 describes this order number as "28 I/O high performance slim PLC (SV2)", so the specification table lists Total I/O = 28. Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP28SV11R2
Q.For DVP-28SV11R2, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Delta DVP-28SV11R2. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under enclosure rating for catalog number DVP-28SV11R2?
For DVP-28SV11R2, enclosure rating is given as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering DVP-28SV11R2, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of DVP-28SV11R2 before ordering?
Match the catalog number DVP-28SV11R2 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the DVP-28SV11R2 replace the unit currently installed in my panel?
Compare catalog number DVP-28SV11R2 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.