Delta · Temperature Controller
DTC1000L is a Delta Temperature Controller. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists DTC1000L under the Delta product line; the product type published for this catalog number is "Temperature Controller". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DTC1000L. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta Temperature Controller variants |
| Catalog number |
Mounting |
|
DTC1000L (this page) |
DIN rail / panel |
| DTC1000C |
DIN rail / panel |
| DTC1000R |
DIN rail / panel |
| DTC1000V |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DTC1000L is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DTC1000L
Delta DTC1000L — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number DTC1000L; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Supply voltage: 24 V DC (IEC 61131-2) — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about DTC1000L
Q.Which official Delta document defines DTC1000L?
The official Delta download-centre catalogue search for this model lists DTC1000L under the Delta product line, and the product type published for this catalog number is "Temperature Controller". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DTC1000L. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under supply voltage for catalog number DTC1000L?
For DTC1000L, supply voltage is given as 24 V DC (IEC 61131-2). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering DTC1000L, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.Where can I find the certifications data for DTC1000L?
It is listed in the specification table for Delta DTC1000L as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the DTC1000L replace the unit currently installed in my panel?
Compare catalog number DTC1000L and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of DTC1000L before ordering?
Match the catalog number DTC1000L and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.