Delta · variable-frequency drive
DRL-24V120W1AS is a Delta variable-frequency drive with Overload capacity 105-150% of rated load current, Continuous current; Enclosure rating IP20 (IEC 60529); Frequency 47-63 Hz. It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Overload capacity105-150% of rated load current, Continuous current
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency47-63 Hz
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Output current |
5.00 A (120 W max.) |
| Efficiency |
up to 94 % |
| Frequency |
47-63 Hz |
| Overload capacity |
105-150% of rated load current, Continuous current |
| Mechanical |
| Dimensions (H x W x D) |
123.6 x 40 x 117.6 mm (4.87 x 1.57 x 4.63 inch) |
| Weight |
0.54 kg (1.19 lb) |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Delta variable-frequency drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Delta variable-frequency drive variants |
| Catalog number |
Overload capacity |
Frequency |
|
DRL-24V120W1AS (this page) |
105-150% of rated load current, Continuous current |
47-63 Hz |
| DRL-24V120W1AA |
105-150% of rated load current, Continuous current |
47-63 Hz |
| DRL-24V120W1EN |
150% for 60 s |
50/60 Hz |
| DRL-24V240W1AA |
105-150% of rated load current, Continuous current |
47-63 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DRL-24V120W1AS is the device-level element in a Delta variable-frequency drive installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DRL-24V120W1AS
Delta DRL-24V120W1AS — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DRL-24V120W1AS; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Dimensions (H x W x D): 123.6 x 40 x 117.6 mm (4.87 x 1.57 x 4.63 inch) — Record it with the other nameplate data when sourcing a replacement.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Confirm the revision of the installed unit before a like-for-like replacement.
- Output current: 5.00 A (120 W max.) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about DRL-24V120W1AS
Q.Where can I find the certifications data for DRL-24V120W1AS?
It is listed in the specification table for Delta DRL-24V120W1AS as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.For DRL-24V120W1AS, what does the specification table state about overload capacity?
The specification table lists overload capacity = 105-150% of rated load current, Continuous current for Delta DRL-24V120W1AS. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under dimensions (H x W x D) for catalog number DRL-24V120W1AS?
For DRL-24V120W1AS, dimensions (H x W x D) is given as 123.6 x 40 x 117.6 mm (4.87 x 1.57 x 4.63 inch). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for DRL-24V120W1AS?
Send the full catalog number DRL-24V120W1AS, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DRL-24V120W1AS.
Q.Can the DRL-24V120W1AS replace the unit currently installed in my panel?
Compare catalog number DRL-24V120W1AS and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.