Delta · variable-frequency drive
DRF-24V480W1GBA is a Delta variable-frequency drive with Rated operational voltage 1-phase 200-240 V / 3-phase 380-480 V; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage1-phase 200-240 V / 3-phase 380-480 V
-
Overload capacity150% for 60 s
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
1-phase 200-240 V / 3-phase 380-480 V |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Output current |
0-10.0 A |
| Efficiency |
up to 94 % |
| Frequency |
50/60 Hz |
| Overload capacity |
150% for 60 s |
| Mechanical |
| Dimensions (H x W x D) |
123.6 x 56 x 116.8 mm (4.87 x 2.20 x 4.60 inch) |
| Weight |
0.88 kg (1.94 lb) |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Delta variable-frequency drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Delta variable-frequency drive variants |
| Catalog number |
Overload capacity |
Rated operational voltage |
Frequency |
|
DRF-24V480W1GBA (this page) |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRF-24V240W1GBA |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRF-240W1GBA |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRF-48V480W1GBA |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DRF-24V480W1GBA is the device-level element in a Delta variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200-240 V / 3-phase 380-480 V — and switches or conditions the load within the 1-phase 200-240 V / 3-phase 380-480 V ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DRF-24V480W1GBA
Delta DRF-24V480W1GBA — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DRF-24V480W1GBA; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 0.88 kg (1.94 lb) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 123.6 x 56 x 116.8 mm (4.87 x 2.20 x 4.60 inch) — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about DRF-24V480W1GBA
Q.Where can I find the certifications data for DRF-24V480W1GBA?
It is listed in the specification table for Delta DRF-24V480W1GBA as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.For DRF-24V480W1GBA, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 1-phase 200-240 V / 3-phase 380-480 V for Delta DRF-24V480W1GBA. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under output current for catalog number DRF-24V480W1GBA?
For DRF-24V480W1GBA, output current is given as 0-10.0 A. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of DRF-24V480W1GBA before ordering?
Match the catalog number DRF-24V480W1GBA and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for DRF-24V480W1GBA?
Send the full catalog number DRF-24V480W1GBA, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DRF-24V480W1GBA.