Delta · variable-frequency drive
DRF-24V240W1GBA is a Delta variable-frequency drive with Rated operational voltage 1-phase 200-240 V / 3-phase 380-480 V; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage1-phase 200-240 V / 3-phase 380-480 V
-
Overload capacity150% for 60 s
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
1-phase 200-240 V / 3-phase 380-480 V |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Frequency |
50/60 Hz |
| Overload capacity |
150% for 60 s |
| Mechanical |
| Dimensions (H x W x D) |
123.6 x 40 x 116.8 mm (4.87 x 1.57 x 4.60 inch) |
| Weight |
0.64 kg (1.41 lb) |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Delta variable-frequency drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Delta variable-frequency drive variants |
| Catalog number |
Overload capacity |
Rated operational voltage |
Frequency |
|
DRF-24V240W1GBA (this page) |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRF-24V480W1GBA |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRF-240W1GBA |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRF-48V480W1GBA |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DRF-24V240W1GBA is the device-level element in a Delta variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200-240 V / 3-phase 380-480 V — and switches or conditions the load within the 1-phase 200-240 V / 3-phase 380-480 V ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DRF-24V240W1GBA
Delta DRF-24V240W1GBA — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DRF-24V240W1GBA; record the nameplate data of the unit being replaced before selecting an equivalent.
- Weight: 0.64 kg (1.41 lb) — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Efficiency: up to 94 % — Verify it in the project documentation before confirming the order.
- Frequency: 50/60 Hz — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about DRF-24V240W1GBA
Q.Before ordering DRF-24V240W1GBA, which efficiency entry should be checked?
The efficiency entry quoted above is up to 94 %. Confirm this figure against the unit currently in the panel.
Q.Where can I find the overload capacity data for DRF-24V240W1GBA?
It is listed in the specification table for Delta DRF-24V240W1GBA as 150% for 60 s. Use the value as the reference when sourcing a current-production equivalent.
Q.For DRF-24V240W1GBA, what does the specification table state about frequency?
The specification table lists frequency = 50/60 Hz for Delta DRF-24V240W1GBA. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the DRF-24V240W1GBA replace the unit currently installed in my panel?
Compare catalog number DRF-24V240W1GBA and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for DRF-24V240W1GBA?
Send the full catalog number DRF-24V240W1GBA, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DRF-24V240W1GBA.