Beckhoff EL3204 Analog Input Module

SKU: EL3204
Regular price $452.51
In stock (96 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Beckhoff · EtherCAT Terminal

EL3204 is a Beckhoff industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Supply voltage24 V DC (IEC 61131-2)
  • Enclosure ratingIP20 (IEC 60529)
  • Operating temperature0...+55 °C (IEC 60068-2-1)
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Tripping characteristic 8…9 mm
Supply voltage 24 V DC (IEC 61131-2)
Frequency typ. 1 kHz
I/O and communication
Bus interface typ. 190 mA
Communication ports EtherCAT, Ethernet
Resolution 0.1°C per digit
Mechanical
Dimensions (H x W x D) 12 mm x 100 mm x 68 mm
Weight approx. 60 g
Mounting 35 mm DIN rail (IEC 60715)
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Storage temperature -40…+85°C
Certifications CE, UL, cULus
Humidity 95%, no condensation

Values follow the Beckhoff EtherCAT Terminal specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Beckhoff EtherCAT Terminal variants
Catalog number Mounting
EL3204 (this page) 35 mm DIN rail (IEC 60715)
EL3201 DIN rail / panel
EL3202 35 mm DIN rail (IEC 60715)
EL3214 35 mm DIN rail (IEC 60715)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The EL3204 is the device-level element in a Beckhoff industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Beckhoff EL3204

Beckhoff EL3204 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number EL3204; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.

  • Dimensions (H x W x D): 12 mm x 100 mm x 68 mm — Check this value against the nameplate of the installed unit before ordering.
  • Tripping characteristic: 8…9 mm — Match it to the existing panel and upstream protection.
  • Weight: approx. 60 g — Record it with the other nameplate data when sourcing a replacement.
  • Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about EL3204

Q.For EL3204, what does the specification table state about frequency?

The specification table lists frequency = typ. 1 kHz for Beckhoff EL3204. Confirm this figure against the unit currently in the panel.

Q.Which value is published under dimensions (H x W x D) for catalog number EL3204?

For EL3204, dimensions (H x W x D) is given as 12 mm x 100 mm x 68 mm. Use the value as the reference when sourcing a current-production equivalent.

Q.Before ordering EL3204, which weight entry should be checked?

The weight entry quoted above is approx. 60 g. Check the revision of the installed unit if the catalog number has been superseded.

Q.What should I include in an enquiry for EL3204?

Send the full catalog number EL3204, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Beckhoff EL3204.

Q.Can the EL3204 replace the unit currently installed in my panel?

Compare catalog number EL3204 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!