Beckhoff · EtherCAT Terminal
EL3202 is a Beckhoff industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Tripping characteristic |
8…9 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Frequency |
typ. 1 kHz |
| I/O and communication |
| Bus interface |
typ. 190 mA |
| Communication ports |
EtherCAT, Ethernet |
| Resolution |
0.1°C per digit |
| Mechanical |
| Dimensions (H x W x D) |
12 mm x 100 mm x 68 mm |
| Weight |
approx. 60 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Storage temperature |
-40…+85°C |
| Certifications |
CE, UL, cULus |
| Humidity |
95%, no condensation |
Values follow the Beckhoff EtherCAT Terminal specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Beckhoff EtherCAT Terminal variants |
| Catalog number |
Mounting |
|
EL3202 (this page) |
35 mm DIN rail (IEC 60715) |
| EL3201 |
DIN rail / panel |
| EL3204 |
35 mm DIN rail (IEC 60715) |
| EL3214 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The EL3202 is the device-level element in a Beckhoff industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Beckhoff EL3202
Beckhoff EL3202 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number EL3202; record the nameplate data of the unit being replaced before selecting an equivalent.
- Bus interface: typ. 190 mA — Confirm the revision of the installed unit before a like-for-like replacement.
- Communication ports: EtherCAT, Ethernet — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Frequency: typ. 1 kHz — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about EL3202
Q.Which value is published under operating temperature for catalog number EL3202?
For EL3202, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering EL3202, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 12 mm x 100 mm x 68 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the supply voltage data for EL3202?
It is listed in the specification table for Beckhoff EL3202 as 24 V DC (IEC 61131-2). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of EL3202 before ordering?
Match the catalog number EL3202 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for EL3202?
Send the full catalog number EL3202, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Beckhoff EL3202.