Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Beckhoff · EtherCAT Terminal
EL2828 is a Beckhoff circuit breaker with Tripping characteristic 8…9 mm; Rated operational voltage 24 V DC (-15%/+20%); Breaking capacity Icu/Ics typ. < 40 A. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated operational voltage | 24 V DC (-15%/+20%) |
|---|---|
| Breaking capacity Icu/Ics | typ. < 40 A |
| Tripping characteristic | 8…9 mm |
| Supply voltage | 24 V DC (IEC 61131-2) |
| Output current | 2 A per channel, ∑ 10 A |
| I/O and communication | |
| Bus interface | typ. 110 mA |
| Communication ports | EtherCAT, Ethernet |
| Mechanical | |
| Dimensions (H x W x D) | 12 mm x 100 mm x 68 mm |
| Weight | approx. 70 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Storage temperature | -40…+85°C |
| Certifications | CE, UL, cULus |
| Humidity | 95%, no condensation |
Values follow the Beckhoff EtherCAT Terminal specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Beckhoff EtherCAT Terminal variants | |||
| Catalog number | Breaking capacity Icu/Ics | Tripping characteristic | Rated operational voltage |
|---|---|---|---|
| EL2828 (this page) | typ. < 40 A | 8…9 mm | 24 V DC (-15%/+20%) |
| EL2808 | typ. < 2 A | 8…9 mm | 24 V DC (-15%/+20%) |
| EL2809 | typ. < 2 A | 8…9 mm | 24 V DC (-15%/+20%) |
| EL2819 | typ. < 1 A | 8…9 mm | 24 V DC (-15%/+20%) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The EL2828 is the device-level element in a Beckhoff circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the 24 V DC (-15%/+20%) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Beckhoff EL2828 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number EL2828; record the nameplate data of the unit being replaced before selecting an equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Q.Where can I find the tripping characteristic data for EL2828?
It is listed in the specification table for Beckhoff EL2828 as 8…9 mm. Confirm this figure against the unit currently in the panel.
Q.For EL2828, what does the specification table state about output current?
The specification table lists output current = 2 A per channel, ∑ 10 A for Beckhoff EL2828. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under weight for catalog number EL2828?
For EL2828, weight is given as approx. 70 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for EL2828?
Send the full catalog number EL2828, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Beckhoff EL2828.
Q.How do I confirm compatibility of EL2828 before ordering?
Match the catalog number EL2828 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
