B&R · B&R X20 I/O module
X20PS3300 is a B&R circuit breaker with Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics Short-circuit proof, temporary overload; Supply voltage 24 VDC supply module for I/O and bus. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsShort-circuit proof, temporary overload
-
Supply voltage24 VDC supply module for I/O and bus
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
Short-circuit proof, temporary overload |
| Supply voltage |
24 VDC supply module for I/O and bus |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Overload capacity |
Yes, using LED status indicator and software |
| I/O and communication |
| Communication ports |
POWERLINK, Ethernet |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the B&R B&amp;R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| B&R B&amp;R X20 I/O module variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
X20PS3300 (this page) |
Short-circuit proof, temporary overload |
<= 440 V AC |
| X20PS3310 |
Short-circuit proof, temporary overload |
<= 440 V AC |
| X20PS2100 |
— |
— |
| X20PS2110 |
— |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The X20PS3300 is the device-level element in a B&R circuit breaker installation. It receives the field signals and control supply listed above — 24 VDC supply module for I/O and bus — and switches or conditions the load within the <= 440 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial X20PS3300
Industrial X20PS3300 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number X20PS3300; record the nameplate data of the unit being replaced before selecting an equivalent.
- Efficiency: up to 94 % — Use it as the reference when cross-checking a current-production equivalent.
- Overload capacity: Yes, using LED status indicator and software — Verify it in the project documentation before confirming the order.
- Communication ports: POWERLINK, Ethernet — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 VDC supply module for I/O and bus — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about X20PS3300
Q.For X20PS3300, what does the specification table state about efficiency?
The specification table lists efficiency = up to 94 % for Industrial X20PS3300. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under certifications for catalog number X20PS3300?
For X20PS3300, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering X20PS3300, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 VDC supply module for I/O and bus. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of X20PS3300 before ordering?
Match the catalog number X20PS3300 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for X20PS3300?
Send the full catalog number X20PS3300, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial X20PS3300.