B&R · B&R X20 I/O module
X20IF1072 is a B&R industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
0.79 W |
| I/O and communication |
| Communication ports |
POWERLINK, Ethernet |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the B&R B&R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| B&R B&R X20 I/O module variants |
| Catalog number |
Mounting |
|
X20IF1072 (this page) |
DIN rail / panel |
| X20IF1020 |
DIN rail / panel |
| X20IF1030 |
DIN rail / panel |
| X20IF1041-1 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The X20IF1072 is the device-level element in a B&R industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial X20IF1072
Industrial X20IF1072 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number X20IF1072; verify the catalog number against your bill of materials before requesting a quotation.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Power consumption: 0.79 W — Use it as the reference when cross-checking a current-production equivalent.
- Communication ports: POWERLINK, Ethernet — Verify it in the project documentation before confirming the order.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about X20IF1072
Q.Which value is published under power consumption for catalog number X20IF1072?
For X20IF1072, power consumption is given as 0.79 W. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering X20IF1072, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the certifications data for X20IF1072?
It is listed in the specification table for Industrial X20IF1072 as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of X20IF1072 before ordering?
Match the catalog number X20IF1072 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the X20IF1072 replace the unit currently installed in my panel?
Compare catalog number X20IF1072 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.