B&R · B&R X20 I/O module
X20IF1041-1 is a B&R industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
1.1 W |
| I/O and communication |
| Bus interface |
CANopen master |
| Communication ports |
POWERLINK, Ethernet |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the B&R B&R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| B&R B&R X20 I/O module variants |
| Catalog number |
Mounting |
|
X20IF1041-1 (this page) |
DIN rail / panel |
| X20IF1020 |
DIN rail / panel |
| X20IF1030 |
DIN rail / panel |
| X20IF1051-1 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The X20IF1041-1 is the device-level element in a B&R industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial X20IF1041-1
Industrial X20IF1041-1 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number X20IF1041-1; verify the catalog number against your bill of materials before requesting a quotation.
- Bus interface: CANopen master — Check this value against the nameplate of the installed unit before ordering.
- Communication ports: POWERLINK, Ethernet — Match it to the existing panel and upstream protection.
- Power consumption: 1.1 W — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about X20IF1041-1
Q.Before ordering X20IF1041-1, which communication ports entry should be checked?
The communication ports entry quoted above is POWERLINK, Ethernet. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the certifications data for X20IF1041-1?
It is listed in the specification table for Industrial X20IF1041-1 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For X20IF1041-1, what does the specification table state about bus interface?
The specification table lists bus interface = CANopen master for Industrial X20IF1041-1. Confirm this figure against the unit currently in the panel.
Q.Can the X20IF1041-1 replace the unit currently installed in my panel?
Compare catalog number X20IF1041-1 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of X20IF1041-1 before ordering?
Match the catalog number X20IF1041-1 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.