B&R · B&R X20 I/O module
X20IF1063 is a B&R industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
0.87 W |
| I/O and communication |
| Bus interface |
PROFIBUS DP V0 slave |
| Communication ports |
POWERLINK, Ethernet |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the B&R B&R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| B&R B&R X20 I/O module variants |
| Catalog number |
Mounting |
|
X20IF1063 (this page) |
DIN rail / panel |
| X20IF10631 |
DIN rail / panel |
| X20IF1061 |
DIN rail / panel |
| X20IF10611 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The X20IF1063 is the device-level element in a B&R industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial X20IF1063
Industrial X20IF1063 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number X20IF1063; record the nameplate data of the unit being replaced before selecting an equivalent.
- Power consumption: 0.87 W — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Supply voltage: 24 V DC (IEC 61131-2) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about X20IF1063
Q.Which value is published under supply voltage for catalog number X20IF1063?
For X20IF1063, supply voltage is given as 24 V DC (IEC 61131-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering X20IF1063, which power consumption entry should be checked?
The power consumption entry quoted above is 0.87 W. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the certifications data for X20IF1063?
It is listed in the specification table for Industrial X20IF1063 as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Can the X20IF1063 replace the unit currently installed in my panel?
Compare catalog number X20IF1063 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of X20IF1063 before ordering?
Match the catalog number X20IF1063 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.