B&R · B&R X20 I/O module
X20IF10611 is a B&R industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
1.8 W |
| I/O and communication |
| Bus interface |
PROFIBUS DP V0/V1 master |
| Communication ports |
POWERLINK, Ethernet |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the B&R B&R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| B&R B&R X20 I/O module variants |
| Catalog number |
Mounting |
|
X20IF10611 (this page) |
DIN rail / panel |
| X20IF1061 |
DIN rail / panel |
| X20IF1063 |
DIN rail / panel |
| X20IF10631 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The X20IF10611 is the device-level element in a B&R industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial X20IF10611
Industrial X20IF10611 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number X20IF10611; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Communication ports: POWERLINK, Ethernet — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Bus interface: PROFIBUS DP V0/V1 master — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about X20IF10611
Q.Where can I find the mounting data for X20IF10611?
It is listed in the specification table for Industrial X20IF10611 as DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.For X20IF10611, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Industrial X20IF10611. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under communication ports for catalog number X20IF10611?
For X20IF10611, communication ports is given as POWERLINK, Ethernet. Confirm this figure against the unit currently in the panel.
Q.Can the X20IF10611 replace the unit currently installed in my panel?
Compare catalog number X20IF10611 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for X20IF10611?
Send the full catalog number X20IF10611, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial X20IF10611.