Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
B&R · B&R X20 I/O module
X20CP1685 is a B&R variable-frequency drive with Overload capacity Yes, using LED status indicator and software; Enclosure rating IP20 (IEC 60529); Frequency 800 MHz. It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 24 V DC (IEC 61131-2) |
|---|---|
| Input voltage range | 24 VDC -20% / +25% (nominal voltage: 24 VDC) (max. input power at nominal voltage: 36 W) |
| Output current | 0.5 A |
| Power consumption | 6.9 W |
| Frequency | 800 MHz |
| Overload capacity | Yes, using LED status indicator and software |
| I/O and communication | |
| Bus interface | POWERLINK (V2) managing or controlled node |
| Communication ports | POWERLINK, Ethernet |
| Mechanical | |
| Weight | 480 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the B&R B&R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| B&R B&R X20 I/O module variants | |||
| Catalog number | Overload capacity | Frequency | |
|---|---|---|---|
| X20CP1685 (this page) | Yes, using LED status indicator and software | 800 MHz | |
| X20CP1684 | Yes, using LED status indicator and software | 400 MHz (compatible). | |
| X20CP1301 | Configurable | 200 MHz | |
| X20CP1381 | Configurable | 200 MHz | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The X20CP1685 is the device-level element in a B&R variable-frequency drive installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Industrial X20CP1685 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number X20CP1685; verify the catalog number against your bill of materials before requesting a quotation.
Available from stock with datasheet, certificates and a quotation on request.
Q.Where can I find the mounting data for X20CP1685?
It is listed in the specification table for Industrial X20CP1685 as 35 mm DIN rail (IEC 60715). Confirm this figure against the unit currently in the panel.
Q.For X20CP1685, what does the specification table state about output current?
The specification table lists output current = 0.5 A for Industrial X20CP1685. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under supply voltage for catalog number X20CP1685?
For X20CP1685, supply voltage is given as 24 V DC (IEC 61131-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of X20CP1685 before ordering?
Match the catalog number X20CP1685 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the X20CP1685 replace the unit currently installed in my panel?
Compare catalog number X20CP1685 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
