Couldn't load pickup availability
All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.
Got questions?
Feel free to get in touch
Ask an expert!
The B&R X20CP1301 is a x20 plc cpu. The listed technical data shows a supply of Yes, using LED status indicator, communication via Yes, using LED status indicator, rated IP20, based on the manufacturer's datasheet. It is supplied by SHLY-PLC, an independent industrial-automation distributor: every unit is visually inspected and functionally checked before dispatch, held in ready stock and shipped worldwide for maintenance, spares and retrofit use. Share your application or existing part number and our team will confirm fitment and comparable in-stock alternatives.
Technical parameters compiled from the manufacturer data sheet and reference documentation.
| Technical Specifications | |
| Communication & Interfaces | |
| Interfaces | 1x RS232, 1x Ethernet, 1x USB, 1x X2X Link |
| Other | |
| System module | Controller |
| Outputs | Digital outputs: Yes, using LED status indicator and software (output error status) |
| CPU function | Yes, using LED status indicator |
| Inputs | Analog inputs: Yes, using LED status indicator and software |
| Temperature | Yes, using software register |
| Controller redundancy | No |
| ACOPOS support | Yes |
| Internal I/O | 2.3 W |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Non-compliant |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| LR | ENV1 |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| B&R ID code | 0xE35B |
| Cooling | Fanless |
| Status indicators | CPU function, Ethernet, RS232, PLC power supply, I/O power supply, I/O function per channel |
| Power consumption without interface module and USB | 4.3 W |
| Power consumption for X2X Link power supply | 0.8 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Type of signal lines | Shielded lines must be used for all high-speed digital inputs/outputs, line length: Max. 20 m |
| Input voltage | 24 VDC -15% / +20% |
| Input current | Max. 1 A |
| Fuse | Integrated, cannot be replaced |
| Nominal output power | 2 W |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Nominal output voltage | 24 VDC |
| Permissible contact load | 10 A |
| Data code | 16 kB |
| Clock frequency | 200 MHz |
| L2 cache | 128 kB |
| RAM | 128 MB DDR3 SDRAM |
| Guaranteed | 40 TB |
| Results for 5 years | 21.9 GB/day |
| Data retention | 10 years |
| Error-correcting code (ECC) | Yes |
| Real-time clock | Retention for at least 300 hours, typ. 1000 hours at 25°C, 1 s resolution, -18 to 28 ppm accuracy at 25°C |
| Integrated I/O processor | Processes I/O data points in the background |
| Remanent variables | 16 kB FRAM, retention >10 years |
| Shortest task class cycle time | 2 ms |
| Typical instruction cycle time | 0.0419 µs |
| Variant | Connection via 16-pin terminal block X20TB1F |
| Max. distance | 900 m |
| Transfer rate | Max. 115.2 kbit/s |
| Physical layer | 10BASE-T/100BASE-TX |
| Half-duplex | Yes |
| Variant | 1x RJ45 shielded |
| Line length | Max. 100 m between 2 stations (segment length) |
| Transfer rate | 10/100 Mbit/s |
| Variant | Type A |
| Max. output current | 0.5 A |
| Fieldbus | X2X Link master |
| Hardware | Standard inputs and mixed channels: ≤200 μs High-speed inputs: ≤2 μs, when used as standard inputs: ≤200 μs |
| Software | Default 1 ms, configurable between 0 and 25 ms in 0.1 ms increments |
| Low | <5 VDC |
| High | >15 VDC |
| Quantity | 14 standard inputs, 4 high-speed inputs and 4 mixed channels, configuration as input or output using software |
| Nominal voltage | 24 VDC |
| Input circuit | Sink |
| Connection type | 1-wire connections |
| Input resistance | X1 - Standard inputs: 6.8 kΩ X2 - Standard inputs: 8.9 kΩ X2 - High-speed inputs: 6.8 kΩ X3 - Mixed channels: 8.9 kΩ |
| Additional functions | X2 - High-speed digital inputs: 2x 250 kHz event counting, 2x AB counter, ABR incremental encoder, direction/frequency, period measurement, gate measurement, differential time measurement, edge counters, edge times |
| Quantity | 2 |
| Counter size | 32-bit |
| Input frequency | Max. 100 kHz |
| Evaluation | 4x |
| Encoder power supply | Module-internal, max. 300 mA |
| Quantity | 1 |
| Signal form | Square wave pulse |
| Evaluation | 1x |
| Input frequency | Max. 250 kHz |
| Counter frequency | 250 kHz |
| Possible measurements | Period measurement, gate measurement, differential time measurement, edge counter, edge times |
| Measurements per module | Each function up to 2x |
| Input frequency | Max. 10 kHz |
| Timestamp | 1 µs resolution |
| Data type | INT |
| Gain | 0.18% (Rev. <C0: 0.37%) |
| Offset | 0.04% (Rev. <C0: 0.25%) |
| Gain | 0 to 20 mA = 0.15% (Rev. <C0: 0.52%) / 4 to 20 mA = 0.25% |
| Offset | 0 to 20 mA = 0.1% (Rev. <C0: 0.4%) / 4 to 20 mA = 0.15% |
| 50 Hz | 70 dB |
| Input type | Differential input |
| Conversion time | 1 channel enabled: 100 µs 2 channels enabled: 200 µs |
| Input protection | Protection against wiring with supply voltage |
| Output of digital value during overload | Configurable |
| Conversion procedure | SAR |
| Input filter | Third-order low-pass filter / Cutoff frequency 1 kHz |
| Common-mode range | ±12 V |
| Crosstalk between channels | <-70 dB |
| Pt1000 | -200 to 850°C |
| Gain | 0.3% (Rev. <C0: 1.93%) |
| Offset | 0.15% (Rev. <C0: 0.32%) |
| 50 Hz | >60 dB |
| Digital converter resolution | 13-bit |
| Conversion time | Only temperature input enabled: 200 µs Temperature and analog input enabled: 400 µs |
| Output format | INT or UINT for resistance measurement |
| Resistance measurement range | 0.1 to 4000 Ω |
| Resistance measurement resolution | 1 LSB = 0x0005 = 0.49 Ω |
| Input filter | First-order low-pass filter / cutoff frequency 7 Hz |
| Sensor standard | EN 60751 |
| Common-mode range | 1 V |
| Linearization method | Internal |
| Measuring current | 1 mA |
| Nonlinearity | <0.05% |
| Standardized range of values for resistance measurement | 0.1 to 4000.0 Ω |
| Period duration | 5 to 65535 µs corresponds to 200 kHz to 15 Hz |
| Pulse duration | 0 to 100%, minimum 2.5 µs |
| 0 → 1 | Standard outputs and mixed channels: <300 µs High-speed outputs: <3 µs |
| Resistive load | Standard outputs and mixed channels: Max. 500 Hz High-speed outputs: 50 kHz, max. 200 kHz (see section "Switching frequency derating for high-speed digital outputs") |
| Inductive load | See section "Switching inductive loads". |
| Quantity | 4 standard outputs, 4 high-speed outputs and 4 mixed channels, configuration as input or output using software |
| Variant | Standard outputs and mixed channels: Current-sourcing FET High-speed outputs: Push-Pull |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | Standard outputs and mixed channels: 0.5 A High-speed outputs: 0.2 A |
| Total nominal current | Standard outputs and mixed channels: 4 A High-speed outputs: 0.8 A |
| Output circuit | Standard outputs and mixed channels: Source High-speed outputs: Sink or source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current") Internal freewheeling diode for switching inductive loads (see section "Switching inductive loads") |
| Diagnostic status | Standard outputs and mixed channels: Output monitoring with 10 ms delay High-speed outputs: Output monitoring with 10 µs delay |
| Leakage current when the output is switched off | Standard outputs and mixed channels: 5 µA High-speed outputs: 25 µA |
| R DS(on) | 140 mΩ |
| Residual voltage | Standard outputs and mixed channels: <0.1 V at nominal current 0.5 A High-speed outputs: <0.9 V at nominal current 0.1 A |
| Peak short-circuit current | Standard outputs and mixed channels: <3 A High-speed outputs: <20 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Standard outputs and mixed channels: Approx. 10 ms (depends on module temperature) High-speed outputs: No switch-on |
| Electrical isolation | Ethernet (IF2) and X2X (IF6) isolated from each other, from other interfaces and from PLC Channel isolated from bus Channel not isolated from channel or PLC |
| Horizontal | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section "Switching frequency derating for high-speed digital outputs". |
| Storage | -40 to 85°C |
| Operation | 5 to 95%, non-condensing |
| Width | 164 mm |
| Height | 99 mm |
| Depth | 75 mm |
| Note | X20 end cover plate (right) included in delivery 3 X20 terminal blocks (16-pin) included in delivery Interface module slot cover included in delivery |
| Weight | 300 g |
Model variants, options and firmware revisions can affect fitment. Before ordering the B&R X20CP1301 x20 plc cpu, share your existing part number or project requirements and our team will cross-reference comparable in-stock B&R units and verify compatibility. This listing is provided by an independent industrial-automation distributor; brand names and part numbers are used for identification only.
A: Each X20CP1301 is inspected and functionally checked before sale. Contact us for the current stock condition and quantity.
A: In-stock orders placed before 14:00 ship the same business day. Standard worldwide delivery is about 5-8 business days, express shipping is available and orders over $500 ship free.
A: Yes. Share your existing part number or application and our technical team will verify compatibility and provide cross-references to comparable in-stock models.
X20CP1301 · Technical reference data · Independently supplied by SHLY-PLC
Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Economy shipping takes 5–8 business days, while express delivery arrives in 5–8 business days, both subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.
Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
No reviews yet. Be the first to review this product!
