Allen-Bradley · PanelView HMI
2711R-T7T is an Allen-Bradley HMI panel with Screen size 7 in.; Resolution 800 x 480; Supply voltage 24 V DC (IEC 60950-1). It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Screen size7 in.
-
Resolution800 x 480
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| I/O and communication |
| Resolution |
800 x 480 |
| Screen size |
7 in. |
| Mechanical |
| Mounting |
Panel mount / DIN rail |
| Enclosure rating |
IP65 (IEC 60529) |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley PanelView HMI specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley PanelView HMI variants |
| Catalog number |
Screen size |
Supply voltage |
|
2711R-T7T (this page) |
7 in. |
24 V DC (IEC 60950-1) |
| 2711R-T10T |
10 in. |
24 V DC (IEC 60950-1) |
| 2711R-T4T |
4 in. |
24 V DC (IEC 60950-1) |
| 2711-NC13 |
— |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2711R-T7T is the device-level element in an Allen-Bradley HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 2711R-T7T
Allen-Bradley 2711R-T7T — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number 2711R-T7T; verify the catalog number against your bill of materials before requesting a quotation.
- Screen size: 7 in. — Record it with the other nameplate data when sourcing a replacement.
- Mounting: Panel mount / DIN rail — Confirm the revision of the installed unit before a like-for-like replacement.
- Resolution: 800 x 480 — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP65 (IEC 60529) — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2711R-T7T
Q.Where can I find the mounting data for 2711R-T7T?
It is listed in the specification table for Allen-Bradley 2711R-T7T as Panel mount / DIN rail. Compare it with the nameplate of the installed unit before ordering.
Q.For 2711R-T7T, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Allen-Bradley 2711R-T7T. Confirm this figure against the unit currently in the panel.
Q.Which value is published under screen size for catalog number 2711R-T7T?
For 2711R-T7T, screen size is given as 7 in.. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2711R-T7T?
Send the full catalog number 2711R-T7T, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 2711R-T7T.
Q.How do I confirm compatibility of 2711R-T7T before ordering?
Match the catalog number 2711R-T7T and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.