Allen-Bradley · PowerFlex 70 drive
20G11ND065JA0NNNNN is an Allen-Bradley variable-frequency drive with Rated operational voltage 3-phase 400 V AC; Overload capacity 150 % for 60 s (IEC 61800-2); Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage3-phase 400 V AC
-
Overload capacity150 % for 60 s (IEC 61800-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
3-phase 400 V AC |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Output current |
52 A |
| Frequency |
50/60 Hz |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150 % for 60 s (IEC 61800-2) |
| I/O and communication |
| Input type |
AC In w/ Prchg, see More Info |
| Mechanical |
| Mounting |
Cabinet / DIN rail |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley PowerFlex 70 drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley PowerFlex 70 drive variants |
| Catalog number |
Overload capacity |
Rated operational voltage |
Frequency |
|
20G11ND065JA0NNNNN (this page) |
150 % for 60 s (IEC 61800-2) |
3-phase 400 V AC |
50/60 Hz |
| 20G11ND8P0AA0NNNNN |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 20G11ND8P0JA0NNNNN |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 20G11NC060JA0NNNNN |
150 % for 60 s (IEC 61800-2) |
— |
50/60 Hz (IEC 61800-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 20G11ND065JA0NNNNN is the device-level element in an Allen-Bradley variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the 3-phase 400 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides Cabinet / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 20G11ND065JA0NNNNN
Allen-Bradley 20G11ND065JA0NNNNN — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number 20G11ND065JA0NNNNN; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated operational voltage: 3-phase 400 V AC — Check this value against the nameplate of the installed unit before ordering.
- Output current: 52 A — Match it to the existing panel and upstream protection.
- Supply voltage: 1-phase 200...240 V / 3-phase 380...480 V AC — Record it with the other nameplate data when sourcing a replacement.
- Frequency: 50/60 Hz — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 20G11ND065JA0NNNNN
Q.Where can I find the supply voltage data for 20G11ND065JA0NNNNN?
It is listed in the specification table for Allen-Bradley 20G11ND065JA0NNNNN as 1-phase 200...240 V / 3-phase 380...480 V AC. Use the value as the reference when sourcing a current-production equivalent.
Q.For 20G11ND065JA0NNNNN, what does the specification table state about frequency?
The specification table lists frequency = 50/60 Hz for Allen-Bradley 20G11ND065JA0NNNNN. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under control method for catalog number 20G11ND065JA0NNNNN?
For 20G11ND065JA0NNNNN, control method is given as V/f, sensorless vector (IEC 61800-2). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 20G11ND065JA0NNNNN?
Send the full catalog number 20G11ND065JA0NNNNN, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 20G11ND065JA0NNNNN.
Q.Can the 20G11ND065JA0NNNNN replace the unit currently installed in my panel?
Compare catalog number 20G11ND065JA0NNNNN and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.