Allen-Bradley · PowerFlex 70 drive
20G11NC060JA0NNNNN is an Allen-Bradley industrial component with Supply voltage 1-phase 200...240 V / 3-phase 380...480 V AC; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage1-phase 200...240 V / 3-phase 380...480 V AC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Frequency |
50/60 Hz (IEC 61800-2) |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150 % for 60 s (IEC 61800-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley PowerFlex 70 drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley PowerFlex 70 drive variants |
| Catalog number |
Rated operational voltage |
Mounting |
|
20G11NC060JA0NNNNN (this page) |
— |
DIN rail / panel |
| 20G11NC104JA0NNNNN |
3-phase 400 V AC |
Cabinet / DIN rail |
| 20G11ND065JA0NNNNN |
3-phase 400 V AC |
Cabinet / DIN rail |
| 20G11ND8P0AA0NNNNN |
1-phase 200-240 V / 3-phase 380-480 V |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 20G11NC060JA0NNNNN is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 20G11NC060JA0NNNNN
Allen-Bradley 20G11NC060JA0NNNNN — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number 20G11NC060JA0NNNNN; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Overload capacity: 150 % for 60 s (IEC 61800-2) — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 20G11NC060JA0NNNNN
Q.For 20G11NC060JA0NNNNN, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Allen-Bradley 20G11NC060JA0NNNNN. Confirm this figure against the unit currently in the panel.
Q.Which value is published under enclosure rating for catalog number 20G11NC060JA0NNNNN?
For 20G11NC060JA0NNNNN, enclosure rating is given as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 20G11NC060JA0NNNNN, which overload capacity entry should be checked?
The overload capacity entry quoted above is 150 % for 60 s (IEC 61800-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 20G11NC060JA0NNNNN replace the unit currently installed in my panel?
Compare catalog number 20G11NC060JA0NNNNN and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 20G11NC060JA0NNNNN?
Send the full catalog number 20G11NC060JA0NNNNN, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 20G11NC060JA0NNNNN.