Allen-Bradley · Micro800 controller
2080-TC2 is an Allen-Bradley industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
None (communication provided by the Micro800 controller) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley Micro800 controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley Micro800 controller variants |
| Catalog number |
Mounting |
|
2080-TC2 (this page) |
DIN rail / panel |
| 2080-TRIMPOT6 |
DIN rail / panel |
| 2080-DNET20 |
DIN rail / panel |
| 2080-IF2 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 2080-TC2 is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 2080-TC2
Allen-Bradley 2080-TC2 Temperature Input Module. See the manufacturer product information for this catalog number.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Communication ports: None (communication provided by the Micro800 controller) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Supply voltage: 24 V DC (IEC 61131-2) — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2080-TC2
Q.Where can I find the supply voltage data for 2080-TC2?
It is listed in the specification table for Allen-Bradley 2080-TC2 as 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.For 2080-TC2, what does the specification table state about communication ports?
The specification table lists communication ports = None (communication provided by the Micro800 controller) for Allen-Bradley 2080-TC2. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number 2080-TC2?
For 2080-TC2, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 2080-TC2 replace the unit currently installed in my panel?
Compare catalog number 2080-TC2 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2080-TC2?
Send the full catalog number 2080-TC2, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 2080-TC2.