Allen-Bradley · Micro800 controller
2080-IF2 is an Allen-Bradley industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
None (communication provided by the Micro800 controller) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley Micro800 controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley Micro800 controller variants |
| Catalog number |
Mounting |
|
2080-IF2 (this page) |
DIN rail / panel |
| 2080-IF2K |
DIN rail / panel |
| 2080-IF4 |
DIN rail / panel |
| 2080-IQ4 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 2080-IF2 is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 2080-IF2
Allen-Bradley 2080-IF2 Analog Input Module. See the manufacturer product information for this catalog number.
- Communication ports: None (communication provided by the Micro800 controller) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2080-IF2
Q.For 2080-IF2, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Allen-Bradley 2080-IF2. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number 2080-IF2?
For 2080-IF2, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2080-IF2, which communication ports entry should be checked?
The communication ports entry quoted above is None (communication provided by the Micro800 controller). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 2080-IF2 before ordering?
Match the catalog number 2080-IF2 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2080-IF2?
Send the full catalog number 2080-IF2, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 2080-IF2.