Allen-Bradley · CompactLogix PLC
1769-PA4K is an Allen-Bradley power supply with Efficiency ≥90%; Input voltage range 85...264 V AC; Enclosure rating IP20 (IEC 60529). It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Efficiency≥90%
-
Input voltage range85...264 V AC
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Input voltage range |
85...264 V AC |
| Efficiency |
≥90% |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley CompactLogix PLC specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley CompactLogix PLC variants |
| Catalog number |
Efficiency |
|
1769-PA4K (this page) |
≥90% |
| 1769-PA4 |
≥90% |
| 1769-PA2 |
≥90% |
| 1769-PA2K |
≥90% |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1769-PA4K is the device-level element in an Allen-Bradley power supply installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 1769-PA4K
Allen-Bradley 1769-PA4K Power Supply (conformally coated). See the manufacturer product information for this catalog number.
- Mounting: 35 mm DIN rail (IEC 60715) — Confirm the revision of the installed unit before a like-for-like replacement.
- Input voltage range: 85...264 V AC — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1769-PA4K
Q.Where can I find the operating temperature data for 1769-PA4K?
It is listed in the specification table for Allen-Bradley 1769-PA4K as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.For 1769-PA4K, what does the specification table state about input voltage range?
The specification table lists input voltage range = 85...264 V AC for Allen-Bradley 1769-PA4K. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 1769-PA4K?
For 1769-PA4K, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1769-PA4K?
Send the full catalog number 1769-PA4K, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 1769-PA4K.
Q.How do I confirm compatibility of 1769-PA4K before ordering?
Match the catalog number 1769-PA4K and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.