Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Allen-Bradley · circuit breaker
140M-C2E-C10 is an Allen-Bradley circuit breaker with Tripping characteristic B / C / D (IEC 60947-2); Number of poles 1 / 2 / 3 / 4 (IEC 60947-2); Rated operational voltage <= 440 V AC. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated operational voltage | <= 440 V AC |
|---|---|
| Rated insulation voltage Ui | 440 V (IEC 60947-2) |
| Rated impulse withstand Uimp | 4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics | 6 kA / 10 kA (IEC 60947-2) |
| Tripping characteristic | B / C / D (IEC 60947-2) |
| Number of poles | 1 / 2 / 3 / 4 (IEC 60947-2) |
| Mechanical | |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+60 °C |
| Certifications | CE, UL, cULus |
Values follow the Allen-Bradley circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Allen-Bradley circuit breaker variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | Rated operational voltage |
|---|---|---|---|
| 140M-C2E-C10 (this page) | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | <= 440 V AC |
| 140M-C2E-C16 | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | <= 440 V AC |
| 140M-F8N-C32 | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | <= 440 V AC |
| 1489-M1C010 | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | <= 440 V AC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 140M-C2E-C10 is the device-level element in an Allen-Bradley circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the <= 440 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Allen-Bradley 140M-C2E-C10 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number 140M-C2E-C10; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Which value is published under rated insulation voltage Ui for catalog number 140M-C2E-C10?
For 140M-C2E-C10, rated insulation voltage Ui is given as 440 V (IEC 60947-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 140M-C2E-C10, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the tripping characteristic data for 140M-C2E-C10?
It is listed in the specification table for Allen-Bradley 140M-C2E-C10 as B / C / D (IEC 60947-2). Confirm this figure against the unit currently in the panel.
Q.Can the 140M-C2E-C10 replace the unit currently installed in my panel?
Compare catalog number 140M-C2E-C10 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 140M-C2E-C10?
Send the full catalog number 140M-C2E-C10, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 140M-C2E-C10.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
