Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Signal Conditioner
2902065 is a Phoenix Contact circuit breaker with Tripping characteristic 10 mm; Breaking capacity Icu/Ics > 32 mA; Supply voltage 10 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 300 V rms |
|---|---|
| Breaking capacity Icu/Ics | > 32 mA |
| Tripping characteristic | 10 mm |
| Supply voltage | 10 V |
| Output voltage | 13.5 V |
| Output current | ≤ 30 mA |
| Mechanical | |
| Weight | 62.2 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 0.2 mm² ... 2.5 mm² (with ferrule) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Signal Conditioner specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Signal Conditioner variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | |
|---|---|---|---|
| 2902065 (this page) | 10 mm | > 32 mA | |
| 2902061 | 10 mm | — | |
| 2902063 | 10 mm | — | |
| 2902064 | 10 mm | > 32 mA | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2902065 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 10 V — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2902065 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2902065; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
Cross-check the ratings above with the installed device before confirming the order.
Q.For 2902065, what does the specification table state about output voltage?
The specification table lists output voltage = 13.5 V for Phoenix Contact 2902065. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under operating temperature for catalog number 2902065?
For 2902065, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2902065, which rated insulation voltage Ui entry should be checked?
The rated insulation voltage Ui entry quoted above is 300 V rms. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2902065 before ordering?
Match the catalog number 2902065 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2902065 replace the unit currently installed in my panel?
Compare catalog number 2902065 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
