Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Temperature Transmitter
2902032 is a Phoenix Contact industrial component with Supply voltage 11...30 V DC (loop powered); Enclosure rating IP66 / IP67 (IEC 60529); Operating temperature -40...+85 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 300 V rms |
|---|---|
| Tripping characteristic | 10 mm |
| Supply voltage | 11...30 V DC (loop powered) |
| Power consumption | ≤ 350 mW (9.6 V DC) |
| Frequency | 0 Hz ... 10 kHz (via DIP switch) |
| I/O and communication | |
| Response time | 120 ms (15 Hz sample rate) |
| Mechanical | |
| Weight | 117.7 g |
| Mounting | DIN rail mounting |
| Terminal wire size | 0.2 mm² ... 2.5 mm² (with ferrule) |
| Enclosure rating | IP66 / IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -40...+85 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Temperature Transmitter variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 2902032 (this page) | DIN rail mounting | ||
| 2902030 | DIN rail mounting | ||
| 2902031 | DIN rail mounting | ||
| 2902000 | DIN rail mounting | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2902032 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2902032 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2902032; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.For 2902032, what does the specification table state about mounting?
The specification table lists mounting = DIN rail mounting for Phoenix Contact 2902032. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under supply voltage for catalog number 2902032?
For 2902032, supply voltage is given as 11...30 V DC (loop powered). Confirm this figure against the unit currently in the panel.
Q.Before ordering 2902032, which power consumption entry should be checked?
The power consumption entry quoted above is ≤ 350 mW (9.6 V DC). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 2902032 before ordering?
Match the catalog number 2902032 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2902032 replace the unit currently installed in my panel?
Compare catalog number 2902032 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
