Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Temperature Transmitter
2865573 is a Phoenix Contact power supply with Output voltage 6 V; Output current 6.3 mA; Supply voltage 11...30 V DC (loop powered). It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 300 V rms |
|---|---|
| Tripping characteristic | 7 mm |
| Supply voltage | 11...30 V DC (loop powered) |
| Output voltage | 6 V |
| Output current | 6.3 mA |
| Rated torque | 0.5 Nm ... 0.6 Nm |
| I/O and communication | |
| Response time | ≤ 1100 ms (when oversampling = 10 and moving average value = 1) |
| Mechanical | |
| Weight | 180 g |
| Mounting | DIN rail mounting |
| Terminal wire size | 50 Ω (Per cable) |
| Enclosure rating | IP66 / IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -40...+85 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Temperature Transmitter variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 2865573 (this page) | DIN rail mounting | ||
| 2865007 | DIN rail mounting | ||
| 2865010 | DIN rail mounting | ||
| 2865049 | DIN rail mounting | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2865573 is the device-level element in a Phoenix Contact power supply installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2865573 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2865573; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Cross-check the ratings above with the installed device before confirming the order.
Q.Which value is published under tripping characteristic for catalog number 2865573?
For 2865573, tripping characteristic is given as 7 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2865573, which rated torque entry should be checked?
The rated torque entry quoted above is 0.5 Nm ... 0.6 Nm. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the enclosure rating data for 2865573?
It is listed in the specification table for Phoenix Contact 2865573 as IP66 / IP67 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Can the 2865573 replace the unit currently installed in my panel?
Compare catalog number 2865573 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2865573?
Send the full catalog number 2865573, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2865573.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
