Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Temperature Transmitter
2865489 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Breaking capacity Icu/Ics 8 mA; Supply voltage 11...30 V DC (loop powered). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 375 V PP |
|---|---|
| Breaking capacity Icu/Ics | 8 mA |
| Tripping characteristic | 7 mm |
| Supply voltage | 11...30 V DC (loop powered) |
| Output voltage | 9.6 V |
| Output current | 10 mA |
| Power consumption | 0.85 W |
| Frequency | ≤ 5 kHz |
| Rated torque | 0.5 Nm ... 0.6 Nm |
| I/O and communication | |
| Safety integrity SIL/PL | 2 |
| Mechanical | |
| Weight | 180 g |
| Mounting | DIN rail mounting |
| Terminal wire size | 0.2 mm² ... 2.5 mm² |
| Enclosure rating | IP66 / IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -40...+85 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Temperature Transmitter variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | |
|---|---|---|---|
| 2865489 (this page) | 7 mm | 8 mA | |
| 2865405 | 7 mm | — | |
| 2865434 | 7 mm | 8 mA | |
| 2865450 | 7 mm | 8 mA | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2865489 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2865489 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2865489; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Which value is published under terminal wire size for catalog number 2865489?
For 2865489, terminal wire size is given as 0.2 mm² ... 2.5 mm². Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2865489, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 7 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the output voltage data for 2865489?
It is listed in the specification table for Phoenix Contact 2865489 as 9.6 V. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 2865489 before ordering?
Match the catalog number 2865489 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2865489 replace the unit currently installed in my panel?
Compare catalog number 2865489 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
