Phoenix Contact · Connection Cable
2731076 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Weight |
103.56 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
Mounting |
|
2731076 (this page) |
up to 4 A |
DIN rail / panel |
| 2731898 |
up to 4 A |
DIN rail / panel |
| 2734183 |
up to 4 A |
DIN rail / panel |
| 2700720 |
up to 4 A |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2731076 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2731076
Phoenix Contact 2731076 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2731076; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Weight: 103.56 g — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2731076
Q.Which value is published under rated current Ie for catalog number 2731076?
For 2731076, rated current Ie is given as up to 4 A. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2731076, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for 2731076?
It is listed in the specification table for Phoenix Contact 2731076 as IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2731076?
Send the full catalog number 2731076, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2731076.
Q.How do I confirm compatibility of 2731076 before ordering?
Match the catalog number 2731076 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.