Phoenix Contact · Connection Cable
2702140 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
0.3 GHz ... 6 GHz |
| Mechanical |
| Weight |
250.6 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
2702140 (this page) |
DIN rail / panel |
up to 4 A |
| 2702518 |
Plug-in mounting |
up to 4 A |
| 2702520 |
DIN rail / panel |
up to 4 A |
| 2700720 |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2702140 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2702140
Phoenix Contact 2702140 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2702140; verify the catalog number against your bill of materials before requesting a quotation.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Frequency: 0.3 GHz ... 6 GHz — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Weight: 250.6 g — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2702140
Q.Where can I find the certifications data for 2702140?
It is listed in the specification table for Phoenix Contact 2702140 as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.For 2702140, what does the specification table state about weight?
The specification table lists weight = 250.6 g for Phoenix Contact 2702140. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated current Ie for catalog number 2702140?
For 2702140, rated current Ie is given as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 2702140 replace the unit currently installed in my panel?
Compare catalog number 2702140 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2702140?
Send the full catalog number 2702140, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2702140.