Omron · ZEN smart relay
ZENCIF01 is an Omron controller with Total I/O Communication; Enclosure rating IP20 (IEC 60529); Rated current Ie up to 4 A. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Total I/OCommunication
-
Enclosure ratingIP20 (IEC 60529)
-
Rated current Ieup to 4 A
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Total I/O |
Communication |
| Mechanical |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Omron ZEN smart relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron ZEN smart relay variants |
| Catalog number |
Output stage |
Total I/O |
Supply voltage |
|
ZENCIF01 (this page) |
— |
Communication |
— |
| ZEN10C1ARAV2 |
Relay |
10 I/O |
12-24 V DC |
| ZEN10C1DTDV2 |
Transistor |
10 I/O |
12-24 V DC |
| ZEN10C2ARAV2 |
Relay |
12 I/O |
12-24 V DC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The ZENCIF01 is the device-level element in an Omron controller installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron ZENCIF01
Omron ZENCIF01 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number ZENCIF01; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
- Total I/O: Communication — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about ZENCIF01
Q.Where can I find the certifications data for ZENCIF01?
It is listed in the specification table for Omron ZENCIF01 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For ZENCIF01, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Omron ZENCIF01. Confirm this figure against the unit currently in the panel.
Q.Which value is published under total I/O for catalog number ZENCIF01?
For ZENCIF01, total I/O is given as Communication. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for ZENCIF01?
Send the full catalog number ZENCIF01, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Omron ZENCIF01.
Q.How do I confirm compatibility of ZENCIF01 before ordering?
Match the catalog number ZENCIF01 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.