Siemens · SIMATIC S7 PLC / I/O module
6ES7507-0RA00-0AA0 is a Siemens circuit breaker with Breaking capacity Icu/Ics Yes; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/IcsYes
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Yes |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Weight |
760 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
| Degree of protection |
I, with protective conductor |
Values follow the Siemens SIMATIC S7 PLC / I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 6ES7507-0RA00-0AA0 is the device-level element in a Siemens circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Siemens 6ES7507-0RA00-0AA0
Siemens 6ES7507-0RA00-0AA0 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 6ES7507-0RA00-0AA0; record the nameplate data of the unit being replaced before selecting an equivalent.
- Degree of protection: I, with protective conductor — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 35 mm DIN rail (IEC 60715) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 6ES7507-0RA00-0AA0
Q.For 6ES7507-0RA00-0AA0, what does the specification table state about weight?
The specification table lists weight = 760 g for Siemens 6ES7507-0RA00-0AA0. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 6ES7507-0RA00-0AA0?
For 6ES7507-0RA00-0AA0, mounting is given as 35 mm DIN rail (IEC 60715). Confirm this figure against the unit currently in the panel.
Q.Before ordering 6ES7507-0RA00-0AA0, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 6ES7507-0RA00-0AA0?
Send the full catalog number 6ES7507-0RA00-0AA0, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Siemens 6ES7507-0RA00-0AA0.
Q.Can the 6ES7507-0RA00-0AA0 replace the unit currently installed in my panel?
Compare catalog number 6ES7507-0RA00-0AA0 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.