Siemens · HMI panel
6AV2124-0GC01-0AX0 is a Siemens HMI panel with Supply voltage 24 V DC (IEC 60950-1); Enclosure rating IP65 (IEC 60529); Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529)
-
MountingPanel mount / DIN rail
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Mechanical |
| Dimensions (H x W x D) |
19.70 x 26.60 x 11.80 CM |
| Weight |
1.580 Kg |
| Mounting |
Panel mount / DIN rail |
| Enclosure rating |
IP65 (IEC 60529) |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C |
| Certifications |
CE, UL, cULus |
Values follow the Siemens HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 6AV2124-0GC01-0AX0 is the device-level element in a Siemens HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Siemens 6AV2124-0GC01-0AX0
Siemens 6AV2124-0GC01-0AX0 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number 6AV2124-0GC01-0AX0; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Mounting: Panel mount / DIN rail — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+50 °C — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP65 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 6AV2124-0GC01-0AX0
Q.Before ordering 6AV2124-0GC01-0AX0, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 19.70 x 26.60 x 11.80 CM. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the touch type data for 6AV2124-0GC01-0AX0?
It is listed in the specification table for Siemens 6AV2124-0GC01-0AX0 as resistive or projective capacitive. Compare it with the nameplate of the installed unit before ordering.
Q.For 6AV2124-0GC01-0AX0, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 60950-1) for Siemens 6AV2124-0GC01-0AX0. Confirm this figure against the unit currently in the panel.
Q.Can the 6AV2124-0GC01-0AX0 replace the unit currently installed in my panel?
Compare catalog number 6AV2124-0GC01-0AX0 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 6AV2124-0GC01-0AX0 before ordering?
Match the catalog number 6AV2124-0GC01-0AX0 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.