Siemens · SIMATIC HMI / operator panel
6AV123-2MB03-0AX0 is a Siemens HMI panel with Supply voltage 24 V DC (IEC 60950-1); Enclosure rating IP65 (IEC 60529); Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529)
-
MountingPanel mount (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Mechanical |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C |
| Certifications |
CE, UL, cULus |
Values follow the Siemens SIMATIC HMI / operator panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 6AV123-2MB03-0AX0 is the device-level element in a Siemens HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Siemens 6AV123-2MB03-0AX0
Siemens 6AV123-2MB03-0AX0 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number 6AV123-2MB03-0AX0; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: 0...+50 °C — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP65 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Touch type: resistive or projective capacitive — Verify it in the project documentation before confirming the order.
- Mounting: Panel mount (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 6AV123-2MB03-0AX0
Q.For 6AV123-2MB03-0AX0, what does the specification table state about touch type?
The specification table lists touch type = resistive or projective capacitive for Siemens 6AV123-2MB03-0AX0. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under operating temperature for catalog number 6AV123-2MB03-0AX0?
For 6AV123-2MB03-0AX0, operating temperature is given as 0...+50 °C. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 6AV123-2MB03-0AX0, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP65 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 6AV123-2MB03-0AX0?
Send the full catalog number 6AV123-2MB03-0AX0, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Siemens 6AV123-2MB03-0AX0.
Q.Can the 6AV123-2MB03-0AX0 replace the unit currently installed in my panel?
Compare catalog number 6AV123-2MB03-0AX0 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.