Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
SICK · Photoelectric sensor
WLG16P-24162120A00 is a SICK circuit breaker with Rated operational voltage 240 V AC / 250 V DC; Breaking capacity Icu/Ics Plastic, PMMA; Supply voltage 10 V DC ... 30 V DC 1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated operational voltage | 240 V AC / 250 V DC |
|---|---|
| Breaking capacity Icu/Ics | Plastic, PMMA |
| Supply voltage | 10 V DC ... 30 V DC 1) |
| Output current | ≤ 100 mA |
| Power consumption | 30 mA 2) |
| Frequency | 1000 Hz 1) |
| I/O and communication | |
| Communication ports | IO-Link V1.1 |
| Response time | 500 µs 1) |
| Mechanical | |
| Weight | 50 g |
| Mounting | Through body / bracket |
| Enclosure rating | IP65 / IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+70 °C (IEC 60068-2-1) |
| Certifications | CE, cULus |
Values follow the SICK Photoelectric sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| SICK Photoelectric sensor variants | |||
| Catalog number | Rated operational voltage | ||
|---|---|---|---|
| WLG16P-24162120A00 (this page) | 240 V AC / 250 V DC | ||
| WLG16P-2416212BA00 | — | ||
| WLG12-P438 | — | ||
| WLG12-V538 | 240 V AC / 250 V DC | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The WLG16P-24162120A00 is the device-level element in a SICK circuit breaker installation. It receives the field signals and control supply listed above — 10 V DC ... 30 V DC 1) — and switches or conditions the load within the 240 V AC / 250 V DC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides Through body / bracket support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
SICK WLG16P-24162120A00 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number WLG16P-24162120A00; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Available from stock with datasheet, certificates and a quotation on request.
Q.For WLG16P-24162120A00, what does the specification table state about communication ports?
The specification table lists communication ports = IO-Link V1.1 for SICK WLG16P-24162120A00. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under breaking capacity Icu/Ics for catalog number WLG16P-24162120A00?
For WLG16P-24162120A00, breaking capacity Icu/Ics is given as Plastic, PMMA. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering WLG16P-24162120A00, which weight entry should be checked?
The weight entry quoted above is 50 g. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for WLG16P-24162120A00?
Send the full catalog number WLG16P-24162120A00, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for SICK WLG16P-24162120A00.
Q.How do I confirm compatibility of WLG16P-24162120A00 before ordering?
Match the catalog number WLG16P-24162120A00 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
