SICK AFM60B-S1AA004096 Absolute multi-turn encoder

SICK · Incremental / absolute encoder

AFM60B-S1AA004096 is a SICK encoder with Supply voltage 10...30 V DC; Enclosure rating IP65 / IP67 (IEC 60529); Operating temperature -20...+70 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

• Supply voltage10...30 V DC
• Enclosure ratingIP65 / IP67 (IEC 60529)
• Operating temperature-20...+70 °C (IEC 60068-2-1)
• MountingDIN rail / panel

Specifications

Values follow the SICK Incremental / absolute encoder specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The AFM60B-S1AA004096 is the device-level element in a SICK encoder installation. It receives the field signals and control supply listed above — 10...30 V DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for SICK AFM60B-S1AA004096

SICK AFM60B-S1AA004096 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number AFM60B-S1AA004096; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

• Operating temperature: -20...+70 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
• Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
• Enclosure rating: IP65 / IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
• Resolution: incremental or absolute, up to 65,536 ppr — Check this value against the nameplate of the installed unit before ordering.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about AFM60B-S1AA004096