Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Schneider Electric · Proximity Sensor
XSAV01801 is a Schneider Electric proximity sensor with Output type (PNP/NPN) PNP or NPN 3-wire DC; Supply voltage 12...24 V DC (10...36 V limits); Enclosure rating Nickel-plated brass / PPS. It is used in conveyor object detection, machine guarding, position feedback where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 12...24 V DC (10...36 V limits) |
|---|---|
| Frequency | 6...150 cyc/mn |
| I/O and communication | |
| Response time | <= 1500 Hz switching frequency |
| Output type (PNP/NPN) | PNP or NPN 3-wire DC |
| Mechanical | |
| Weight | 0.3 kg |
| Enclosure rating | Nickel-plated brass / PPS |
| Environment and compliance | |
| Operating temperature | -25...+70 °C |
| Certifications | CE, UL, CSA |
| Degree of protection | IP67 / IP68 conforming to IEC 60529 |
Values follow the Schneider Electric Proximity Sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Schneider Electric Proximity Sensor variants | |||
| Catalog number | Output type (PNP/NPN) | Sensing distance Sn | Supply voltage |
|---|---|---|---|
| XSAV01801 (this page) | PNP or NPN 3-wire DC | — | 12...24 V DC (10...36 V limits) |
| XSAV11373 | PNP or NPN 3-wire DC | 15…25 mm (by variant) | 12...24 V DC (10...36 V limits) |
| XSAV11373EX | PNP or NPN 3-wire DC | 15…25 mm (by variant) | 12...24 V DC (10...36 V limits) |
| XSAV11373L05 | PNP or NPN 3-wire DC | 15…25 mm (by variant) | 12...24 V DC (10...36 V limits) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The XSAV01801 is the device-level element in a Schneider Electric proximity sensor installation. It receives the field signals and control supply listed above — 12...24 V DC (10...36 V limits) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in conveyor object detection, machine guarding, position feedback, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Schneider Electric XSAV01801 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number XSAV01801; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
Available from stock with datasheet, certificates and a quotation on request.
Q.Where can I find the certifications data for XSAV01801?
It is listed in the specification table for Schneider Electric XSAV01801 as CE, UL, CSA. Confirm this figure against the unit currently in the panel.
Q.For XSAV01801, what does the specification table state about degree of protection?
The specification table lists degree of protection = IP67 / IP68 conforming to IEC 60529 for Schneider Electric XSAV01801. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under response time for catalog number XSAV01801?
For XSAV01801, response time is given as <= 1500 Hz switching frequency. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of XSAV01801 before ordering?
Match the catalog number XSAV01801 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for XSAV01801?
Send the full catalog number XSAV01801, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Schneider Electric XSAV01801.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
