Schneider Electric · industrial component
XA2EVM3LC is a Schneider Electric industrial component with Rated operational voltage Up to 600 V AC / 250 V DC; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltageUp to 600 V AC / 250 V DC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated operational voltage |
Up to 600 V AC / 250 V DC |
| Control method |
Spring return (momentary), unmarked |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
| Degree of protection |
IK08 |
Values follow the Schneider Electric industrial component specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The XA2EVM3LC is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — Up to 600 V AC / 250 V DC — and switches or conditions the load within the Up to 600 V AC / 250 V DC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric XA2EVM3LC
Schneider Electric XA2EVM3LC — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number XA2EVM3LC; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Use it as the reference when cross-checking a current-production equivalent.
- Degree of protection: IK08 — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about XA2EVM3LC
Q.Which value is published under mounting for catalog number XA2EVM3LC?
For XA2EVM3LC, mounting is given as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.Before ordering XA2EVM3LC, which degree of protection entry should be checked?
The degree of protection entry quoted above is IK08. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the certifications data for XA2EVM3LC?
It is listed in the specification table for Schneider Electric XA2EVM3LC as CE, UL, CSA, CCC, EAC, Marine. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of XA2EVM3LC before ordering?
Match the catalog number XA2EVM3LC and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the XA2EVM3LC replace the unit currently installed in my panel?
Compare catalog number XA2EVM3LC and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.