Schneider Electric · industrial component
XA2ES542 is a Schneider Electric industrial component with Rated operational voltage Up to 600 V AC / 250 V DC; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltageUp to 600 V AC / 250 V DC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated operational voltage |
Up to 600 V AC / 250 V DC |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
| Degree of protection |
IK08 |
Values follow the Schneider Electric industrial component specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The XA2ES542 is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — Up to 600 V AC / 250 V DC — and switches or conditions the load within the Up to 600 V AC / 250 V DC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric XA2ES542
Schneider Electric XA2ES542 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number XA2ES542; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated operational voltage: Up to 600 V AC / 250 V DC — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Confirm the revision of the installed unit before a like-for-like replacement.
- Degree of protection: IK08 — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about XA2ES542
Q.Which value is published under mounting for catalog number XA2ES542?
For XA2ES542, mounting is given as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering XA2ES542, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the operating temperature data for XA2ES542?
It is listed in the specification table for Schneider Electric XA2ES542 as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Can the XA2ES542 replace the unit currently installed in my panel?
Compare catalog number XA2ES542 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of XA2ES542 before ordering?
Match the catalog number XA2ES542 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.