Schneider Electric · ComPacT contactor
LV36050 is a Schneider Electric circuit breaker with Rated current Ie 50 A; Rated operational voltage <= 690 V AC 25...400 Hz; Breaking capacity Icu/Ics 25 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie50 A
-
Rated operational voltage<= 690 V AC 25...400 Hz
-
Breaking capacity Icu/Ics25 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2
-
Enclosure ratingIP40 conforming to IEC 60529
Specifications
| Electrical |
| Rated current Ie |
50 A |
| Rated operational voltage |
<= 690 V AC 25...400 Hz |
| Rated insulation voltage Ui |
690 V conforming to IEC 60947-4-1 |
| Rated impulse withstand Uimp |
6 kV conforming to IEC 60947 |
| Breaking capacity Icu/Ics |
25 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 |
| Mechanical |
| Weight |
1.074 kg |
| Mounting |
35 mm DIN rail or plate |
| Enclosure rating |
IP40 conforming to IEC 60529 |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
Values follow the Schneider Electric ComPacT contactor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Schneider Electric ComPacT contactor variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
LV36050 (this page) |
25 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 |
<= 690 V AC 25...400 Hz |
| LV510305 |
25-35 kA (B/N variant dependent) |
<= 690 V AC 25...400 Hz |
| LV510306 |
25-35 kA (B/N variant dependent) |
<= 690 V AC 25...400 Hz |
| LV510307 |
25-35 kA (B/N variant dependent) |
<= 690 V AC 25...400 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The LV36050 is the device-level element in a Schneider Electric circuit breaker installation. It receives the field signals and control supply listed above — <= 690 V AC 25...400 Hz — and switches or conditions the load within the 50 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail or plate support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric LV36050
Schneider Electric LV36050 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number LV36050; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Match it to the existing panel and upstream protection.
- Rated operational voltage: <= 690 V AC 25...400 Hz — Record it with the other nameplate data when sourcing a replacement.
- Rated insulation voltage Ui: 690 V conforming to IEC 60947-4-1 — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 35 mm DIN rail or plate — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about LV36050
Q.Which value is published under rated impulse withstand Uimp for catalog number LV36050?
For LV36050, rated impulse withstand Uimp is given as 6 kV conforming to IEC 60947. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering LV36050, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP40 conforming to IEC 60529. Confirm this figure against the unit currently in the panel.
Q.Where can I find the operating temperature data for LV36050?
It is listed in the specification table for Schneider Electric LV36050 as -25...+60 °C. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for LV36050?
Send the full catalog number LV36050, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Schneider Electric LV36050.
Q.Can the LV36050 replace the unit currently installed in my panel?
Compare catalog number LV36050 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.