Schneider Electric · Controller & CPU Module
BMEP582020-v3277 is a Schneider Electric industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Weight |
1.87 lb(US) (0.849 kg) |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
| Humidity |
5…95 % 131 °F (55 °C) without condensation |
Values follow the Schneider Electric Controller & CPU Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Schneider Electric Controller & CPU Module variants |
| Catalog number |
Mounting |
|
BMEP582020-v3277 (this page) |
DIN rail / panel |
| BMEP582020 |
DIN rail / panel |
| BMEP582040 |
DIN rail / panel |
| BMEP582040H |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The BMEP582020-v3277 is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric BMEP582020-v3277
Schneider Electric BMEP582020-v3277 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number BMEP582020-v3277; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Verify it in the project documentation before confirming the order.
- Weight: 1.87 lb(US) (0.849 kg) — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about BMEP582020-v3277
Q.Before ordering BMEP582020-v3277, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the mounting data for BMEP582020-v3277?
It is listed in the specification table for Schneider Electric BMEP582020-v3277 as DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.For BMEP582020-v3277, what does the specification table state about weight?
The specification table lists weight = 1.87 lb(US) (0.849 kg) for Schneider Electric BMEP582020-v3277. Confirm this figure against the unit currently in the panel.
Q.Can the BMEP582020-v3277 replace the unit currently installed in my panel?
Compare catalog number BMEP582020-v3277 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of BMEP582020-v3277 before ordering?
Match the catalog number BMEP582020-v3277 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.