Schneider Electric BMECRA31210 I/O Module

Schneider Electric · I/O Module

BMECRA31210 is a Schneider Electric I/O module with Supply voltage 24 V DC or 100...240 V AC; Communication ports Ethernet, Modbus, USB; Mounting 35 mm DIN rail or panel. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.

• Supply voltage24 V DC or 100...240 V AC
• Mounting35 mm DIN rail or panel
• Operating temperature-10...+55 °C

Specifications

Values follow the Schneider Electric I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The BMECRA31210 is the device-level element in a Schneider Electric I/O module installation. It receives the field signals and control supply listed above — 24 V DC or 100...240 V AC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail or panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Schneider Electric BMECRA31210

Schneider Electric BMECRA31210 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number BMECRA31210; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.

• Mounting: 35 mm DIN rail or panel — Use it as the reference when cross-checking a current-production equivalent.
• Operating temperature: -10...+55 °C — Verify it in the project documentation before confirming the order.
• Degree of protection: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
• Humidity: 95 % without condensation — Match it to the existing panel and upstream protection.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about BMECRA31210