Pro-face · HMI Panel
AGP3300H-S1-D24-RED is a Pro-face HMI panel with Screen size 5.7 inch handheld; Resolution QVGA/VGA; Supply voltage 24 V DC (IEC 60950-1). It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Screen size5.7 inch handheld
-
ResolutionQVGA/VGA
-
Supply voltage24 V DC (IEC 60950-1)
-
Cutout dimensions- (handheld)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Power consumption |
16.7 W max |
| I/O and communication |
| Resolution |
QVGA/VGA |
| Screen size |
5.7 inch handheld |
| Mechanical |
| Dimensions (H x W x D) |
224 x 174 x 87.1 mm |
| Weight |
1.05 kg |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) front |
| Cutout dimensions |
- (handheld) |
| Touch type |
Resistive film (analog) |
| Environment and compliance |
| Operating temperature |
0...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Pro-face HMI Panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pro-face HMI Panel variants |
| Catalog number |
Cutout dimensions |
Screen size |
Supply voltage |
|
AGP3300H-S1-D24-RED (this page) |
- (handheld) |
5.7 inch handheld |
24 V DC (IEC 60950-1) |
| AGP3300H-S1-D24 |
- (handheld) |
5.7 inch handheld |
24 V DC (IEC 60950-1) |
| AGP3300H-L1-D24 |
- (handheld) |
5.7 inch handheld |
24 V DC (IEC 60950-1) |
| AGP3300H-L1-D24-RED |
- (handheld) |
5.7 inch handheld |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AGP3300H-S1-D24-RED is the device-level element in a Pro-face HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial AGP3300H-S1-D24-RED
Industrial AGP3300H-S1-D24-RED — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number AGP3300H-S1-D24-RED; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP65 (IEC 60529) front — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Resolution: QVGA/VGA — Use it as the reference when cross-checking a current-production equivalent.
- Cutout dimensions: - (handheld) — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about AGP3300H-S1-D24-RED
Q.For AGP3300H-S1-D24-RED, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+50 °C (IEC 60068-2-1) for Industrial AGP3300H-S1-D24-RED. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under resolution for catalog number AGP3300H-S1-D24-RED?
For AGP3300H-S1-D24-RED, resolution is given as QVGA/VGA. Confirm this figure against the unit currently in the panel.
Q.Before ordering AGP3300H-S1-D24-RED, which weight entry should be checked?
The weight entry quoted above is 1.05 kg. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of AGP3300H-S1-D24-RED before ordering?
Match the catalog number AGP3300H-S1-D24-RED and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the AGP3300H-S1-D24-RED replace the unit currently installed in my panel?
Compare catalog number AGP3300H-S1-D24-RED and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.