Pilz · Safety Relay
750167 is a Pilz industrial component with Supply voltage DC; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Supply voltage |
DC |
| Power consumption |
2.0 W |
| Rated torque |
0.50 Nm No. 750167 |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Storage temperature |
-40 - 85 °C |
| Certifications |
CE, cULus, TÜV |
Values follow the Pilz Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pilz Safety Relay variants |
| Catalog number |
Mounting |
|
750167 (this page) |
DIN rail / panel |
| 750103 |
35 mm DIN rail (IEC 60715) |
| 750104 |
35 mm DIN rail (IEC 60715) |
| 750105 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 750167 is the device-level element in a Pilz industrial component installation. It receives the field signals and control supply listed above — DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Pilz 750167
Pilz 750167 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 750167; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated insulation voltage Ui: 690 V (IEC 60947-4-1) — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Power consumption: 2.0 W — Record it with the other nameplate data when sourcing a replacement.
- Rated torque: 0.50 Nm No. 750167 — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 750167
Q.For 750167, what does the specification table state about rated insulation voltage Ui?
The specification table lists rated insulation voltage Ui = 690 V (IEC 60947-4-1) for Pilz 750167. Confirm this figure against the unit currently in the panel.
Q.Which value is published under enclosure rating for catalog number 750167?
For 750167, enclosure rating is given as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 750167, which certifications entry should be checked?
The certifications entry quoted above is CE, cULus, TÜV. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 750167 before ordering?
Match the catalog number 750167 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 750167?
Send the full catalog number 750167, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Pilz 750167.