Pilz · Safety Switch
570000 is a Pilz industrial component with Supply voltage 24 V; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V |
| Power consumption |
4.4 VA |
| I/O and communication |
| Response time |
< 20 ms |
| Mechanical |
| Dimensions (H x W x D) |
51.0 mm |
| Weight |
416 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus, TÜV |
Values follow the Pilz Safety Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pilz Safety Switch variants |
| Catalog number |
Mounting |
|
570000 (this page) |
DIN rail / panel |
| 570001 |
DIN rail / panel |
| 570005 |
DIN rail / panel |
| 570500 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 570000 is the device-level element in a Pilz industrial component installation. It receives the field signals and control supply listed above — 24 V — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Pilz 570000
Pilz 570000 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 570000; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Power consumption: 4.4 VA — Record it with the other nameplate data when sourcing a replacement.
- Weight: 416 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, cULus, TÜV — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 570000
Q.Where can I find the supply voltage data for 570000?
It is listed in the specification table for Pilz 570000 as 24 V. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 570000, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Pilz 570000. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 570000?
For 570000, mounting is given as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 570000 before ordering?
Match the catalog number 570000 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 570000 replace the unit currently installed in my panel?
Compare catalog number 570000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.