Phoenix Contact · Relay Module
2970921 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1); Mounting 35 mm DIN rail (IEC 60715). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Mechanical |
| Weight |
318 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 6 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Relay Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Relay Module variants |
| Catalog number |
Mounting |
|
2970921 (this page) |
35 mm DIN rail (IEC 60715) |
| 2972673 |
35 mm DIN rail (IEC 60715) |
| 2972699 |
35 mm DIN rail (IEC 60715) |
| 2972770 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2970921 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2970921
Phoenix Contact 2970921 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2970921; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Rated insulation voltage Ui: 690 V (IEC 60947-4-1) — Match it to the existing panel and upstream protection.
- Degree of protection: ≥ IP54 (Installation location) — Record it with the other nameplate data when sourcing a replacement.
- Rated impulse withstand Uimp: 6 kV (IEC 60947-4-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2970921
Q.Before ordering 2970921, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the weight data for 2970921?
It is listed in the specification table for Phoenix Contact 2970921 as 318 g. Compare it with the nameplate of the installed unit before ordering.
Q.For 2970921, what does the specification table state about rated impulse withstand Uimp?
The specification table lists rated impulse withstand Uimp = 6 kV (IEC 60947-4-1) for Phoenix Contact 2970921. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2970921 before ordering?
Match the catalog number 2970921 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2970921 replace the unit currently installed in my panel?
Compare catalog number 2970921 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.