Phoenix Contact · Hybrid motor starters
2908669 – ELR H5-IES-PT/500AC-3-IOL · Hybrid motor starters
The Phoenix Contact 2908669 (ELR H5-IES-PT/500AC-3-IOL) is a Hybrid motor starters in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 13 sections: Notes, Product properties, Electrical properties, Input data, Output data, Connection data and further sections.
Nominal voltage42 V AC ... 550 V AC
Degree of protectionIP20
Ambient temperature-5 °C ... 55 °C (observe derating)
Dimensions22.5 mm
ConnectionCOMBICON
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Notes, Product properties, Electrical properties, Input data, Output data, Connection data, Signaling, Dimensions, Material specifications, Environmental and real-life conditions, Approvals, Standards and regulations, Mounting. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Notes
Notes on operationIf this device is to be used in combination with the CrossPowerSystem power distribution board, the device mount for the 16 A fuse (order designation: EM-CPS-DA-22,5F/16A; order number: 1002668) is required in order to attach the hybrid motor starter to the power distribution board.
Note on applicationAs things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA.
Product properties
Product typeHybrid motor starters
Product familyCONTACTRON
Operating mode100% operating factor
Electrical properties
Number of phases3
Motor starter typeReversing starter
Switching frequency≤ 2 Hz (Load-dependent)
Maximum power dissipation for nominal condition12 W
Switching frequency≤ 2 Hz (Load-dependent)
Maximum power dissipation4.1 W
Minimum power dissipation0.88 W
Coordination type1
Supply
Rated control circuit supply voltage U S24 V DC
Control supply voltage range19.2 V DC ... 30 V DC
Rated control supply current I S65 mA
Protective circuitSurge protection
ValueReverse polarity protection; Parallel polarity protection diode
Supply: IO-Link
Nominal voltage for I/O supply24 V DC (This supply voltage is provided via the IO-Link interface of the IO-Link master.)
Current consumptiontyp. 65 mA ±15 % (24 V DC)
Valuemax. 150 mA
Protective circuitReverse polarity protection
ValueShort-circuit protection
ValueOverload protection
Insulation characteristics
Rated insulation voltage550 V
Rated surge voltage6 kV
Overvoltage categoryIII
Degree of pollution2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuitSafe isolation (IEC 60947-1)
Isolation characteristics between the control input and control supply voltage to auxiliary circuitSafe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
ValueSafe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC
Emergency tripping
Operate threshold> 33 A
Response time< 0.5 s
Input data
Control
Input nameEnable input
Rated actuating voltage U C24 V DC
Triggering voltage range19.2 V DC ... 30 V DC
Rated actuating current I C7 mA
Switching threshold9.6 V (“0” signal)
Value19.2 V (“1” signal)
Switching level< 5 V DC (For EMERGENCY STOP)
Typical turn-off time< 30 ms
IO-Link
Number of ports1
Connection methodCOMBICON
Connection technology3-conductor
SpecificationV1.1.1
Reverse polarity protectionyes
Cycle Time30 ms
Amount of process data8 Byte (Input data)
Value2 Byte (Output data)
Output data
AC output
Rated operating voltage U e500 V AC
Operating voltage range42 V AC ... 550 V AC
Rated operating current I e3 A (AC-51)
Value3 A (AC-53a)
Mains frequency50/60 Hz
Load current range180 mA ... 3 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2Class 10
Cooling time20 min (for auto reset)
Leakage current0 mA
Protective circuitSurge protection; Varistor
Connection data
Control circuits
Connection methodPush-in connection
Stripping length10 mm
Conductor cross-section rigid0.2 mm² ... 2.5 mm²
Conductor cross-section flexible0.2 mm² ... 2.5 mm²
Conductor cross-section AWG24 ... 14
Load circuit
Connection methodPush-in connection
Stripping length10 mm
Conductor cross-section rigid0.2 mm² ... 2.5 mm²
Conductor cross-section flexible0.2 mm² ... 2.5 mm²
Conductor cross-section AWG24 ... 14
Signaling
Status displayLED (yellow)
Operating voltage displayGreen LED
Error indicationRed LED
Dimensions
Width22.5 mm
Height127 mm
Depth114 mm
Material specifications
Flammability rating according to UL 94 (Housing)V0 (Housing)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-5 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m
Approvals
UL approval
CertificateNLDX.E228652
ValueNRNT.E172140
Safety Integrity Level (SIL, IEC 61508)
Identification≤ 3
NoteSafe shutdown
Performance Level (ISO 13849)
Identificatione
NoteSafe shutdown
Category (ISO 13849)
Identification≤ 3
NoteSafe shutdown
UL data
SCCR100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
Value5 kA (480 V AC (fuse: 20 A RK5 (standard fault)))
FLA3 A (480 V AC)
Group installation20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
Value30 A (class CC or J, SCCR 100kA (480 V AC), #24 - 14 AWG max, solid and stranded)
Category codeNLDX / NRNT
Horsepower ratings0.5 hp (208 V AC)
Value0.5 hp (230 V AC)
Value0.5 hp (240 V AC)
Value1.5 hp (480 V AC)
Standards and regulations
Standards/regulations
Standards/regulationsIEC 60947-1
ValueEN 60947-4-2
ValueIEC 61508
ValueISO 13849
Mounting
Mounting typeDIN rail mounting
Assembly notealignable, for spacing see derating
Mounting positionvertical (horizontal DIN rail, motor output below)
Order number
2908669 — https://www.phoenixcontact.com/en-us/products/hybrid-motor-starter-elr-h5-ies-pt500ac-3-iol-2908669
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2908669.
FAQ
What voltage does the 2908669 operate at?
Phoenix Contact gives a nominal voltage of 24 V DC for this order number.
What degree of protection does the 2908669 have?
It is rated IP20, as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of -5 °C ... 55 °C (observe derating).
What are the dimensions?
The technical data gives 22.5 mm.
How is the 2908669 connected?
Phoenix Contact specifies the connection as COMBICON.
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.