Phoenix Contact · Signal conditioner
2905280 – MACX MCR-SL-2I-2I-ILP · Signal conditioner
The Phoenix Contact 2905280 (MACX MCR-SL-2I-2I-ILP) is a Signal conditioner in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 13 sections: Product properties, Electrical properties, Input data, Output data, Connection data, Ex data and further sections.
Nominal voltageloop-powered, no external supply necessary
Degree of protectionIP20 (not assessed by UL)
Ambient temperature-40 °C ... 85 °C
Dimensions12.5 mm
ConnectionScrew connection
MaterialPA 6.6-FR
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Product properties, Electrical properties, Input data, Output data, Connection data, Ex data, Dimensions, Material specifications, Environmental and real-life conditions, Approvals, EMC data, Standards and regulations, Mounting. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Product properties
Product typeSignal conditioner
Product familyMACX Analog
No. of channels2
Electrical properties
Electrical isolation2-way isolation
Electrical isolation between input and outputyes
Signal transmission behaviorIn = Out
Maximum temperature coefficient≤ 0.002 %/K (of measured value / 100 Ω load)
Transmission error, typical0.08 % (of final value)
Electrical isolation
Test voltage5 kV AC (50 Hz, 60 s)
Overvoltage categoryII
Pollution degree2
Electrical isolation Input/output/power supply IEC/EN 61010-1
Standards/regulationsIEC/EN 61010-1
Rated insulation voltage600 V rms
InsulationSafe isolation
Supply
Supply voltage rangeloop-powered, no external supply necessary
Input data
Signal: Current
Number of inputs2
Configurable/programmableno
Max. voltage input signal< 30.5 V
Current input signal0 mA ... 20 mA
Value4 mA ... 20 mA
Input voltage limitation30.5 V
Voltage dissipation2.9 V (I = 20 mA)
Step response (10-90%)5 ms (500 Ω load)
Additional error, load-dependent0.022 % (of measured value / 100 Ω load)
Response current~ 50 µA
Output data
Signal: Current
Number of outputs2
Configurable/programmableno
Max. voltage output signal27.5 V
Current output signal0 mA ... 20 mA
Value4 mA ... 20 mA
Load/output load current output≤ 1375 Ω (I = 20 mA)
Residual ripple< 10 mV rms (500 Ω load)
Connection data
Connection methodScrew connection
Stripping length7 mm
Screw threadM3
Conductor cross-section rigid0.2 mm² ... 2.5 mm²
Conductor cross-section flexible0.2 mm² ... 2.5 mm²
Conductor cross-section AWG24 ... 14
Tightening torque0.5 Nm ... 0.6 Nm
Test socket
Max. diameter2.3 mm
Ex data
Ex installation (EPL)Gc
ValueDiv. 2
Dimensions
Width12.5 mm
Height112.5 mm
Depth113.7 mm
Depth NS 35/7,5114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)
Material specifications
Colorgray (RAL 7042)
Flammability rating according to UL 94 (Housing)V0 (Housing)
Housing materialPA 6.6-FR
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20 (not assessed by UL)
Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Approvals
CE
CertificateCE-compliant
Noteand EN 61326-1
ATEX
Identification II 3 G Ex nA IIC T4 Gc X
CertificatePxCIF15ATEX2905278X
UL, USA/Canada
IdentificationUL 61010 Listed
ValueClass I, Div. 2, Groups A, B, C, D T4
ValueClass I, Zone 2, Group IIC T4
Safety Integrity Level (SIL, IEC 61508)
Identification3
Certificate968/FSP 1200.02/26
EMC data
Electromagnetic compatibilityConformance with EMC directive
Noise immunityEN 61326-1
Noise emission
Standards/regulationsEN 61000-6-4
Standards and regulations
Electrical isolation2-way isolation
Standards/regulationsEN/IEC 60079-0
ValueEN/IEC 60079-7
Mounting
Mounting typeDIN rail mounting
Order number
2905280 — https://www.phoenixcontact.com/en-us/products/signal-conditioner-macx-mcr-sl-2i-2i-ilp-2905280
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2905280.
FAQ
What voltage does the 2905280 operate at?
Phoenix Contact gives a nominal voltage of loop-powered, no external supply necessary for this order number.
What degree of protection does the 2905280 have?
It is rated IP20 (not assessed by UL), as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of -40 °C ... 85 °C.
What are the dimensions?
The technical data gives 12.5 mm.
How is the 2905280 connected?
Phoenix Contact specifies the connection as Screw connection.
What material is the housing made of?
The technical data lists PA 6.6-FR.
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.