Phoenix Contact · Terminal Block
2904261 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
8 mm |
| Mechanical |
| Weight |
192.8 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.14 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
2904261 (this page) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 2904262 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 2904266 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 2904268 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2904261 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2904261
Phoenix Contact 2904261 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2904261; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 192.8 g — Use it as the reference when cross-checking a current-production equivalent.
- Terminal wire size: 0.14 mm² ... 2.5 mm² — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: 8 mm — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2904261
Q.Which value is published under rated current Ie for catalog number 2904261?
For 2904261, rated current Ie is given as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2904261, which terminal wire size entry should be checked?
The terminal wire size entry quoted above is 0.14 mm² ... 2.5 mm². Confirm this figure against the unit currently in the panel.
Q.Where can I find the enclosure rating data for 2904261?
It is listed in the specification table for Phoenix Contact 2904261 as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2904261?
Send the full catalog number 2904261, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2904261.
Q.How do I confirm compatibility of 2904261 before ordering?
Match the catalog number 2904261 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.