Phoenix Contact · Temperature Transmitter
2902002 is a Phoenix Contact industrial component with Supply voltage 11...30 V DC (loop powered); Enclosure rating IP66 / IP67 (IEC 60529); Operating temperature -40...+85 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage11...30 V DC (loop powered)
-
Enclosure ratingIP66 / IP67 (IEC 60529)
-
Operating temperature-40...+85 °C (IEC 60068-2-1)
-
MountingDIN rail mounting
Specifications
| Electrical |
| Rated insulation voltage Ui |
300 V rms |
| Tripping characteristic |
10 mm |
| Supply voltage |
11...30 V DC (loop powered) |
| Power consumption |
≤ 200 mW (at 9.6 V DC) |
| Frequency |
approx. 30 Hz |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| I/O and communication |
| Response time |
approx. 10 ms |
| Mechanical |
| Weight |
67.7 g |
| Mounting |
DIN rail mounting |
| Terminal wire size |
0.2 mm² ... 1.5 mm² (with ferrule) |
| Enclosure rating |
IP66 / IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-40...+85 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Temperature Transmitter variants |
| Catalog number |
Mounting |
|
2902002 (this page) |
DIN rail mounting |
| 2902000 |
DIN rail mounting |
| 2902001 |
DIN rail mounting |
| 2902003 |
DIN rail mounting |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2902002 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2902002
Phoenix Contact 2902002 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2902002; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP66 / IP67 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Supply voltage: 11...30 V DC (loop powered) — Use it as the reference when cross-checking a current-production equivalent.
- Humidity: 5 % ... 95 % (non-condensing) — Verify it in the project documentation before confirming the order.
- Weight: 67.7 g — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2902002
Q.For 2902002, what does the specification table state about rated insulation voltage Ui?
The specification table lists rated insulation voltage Ui = 300 V rms for Phoenix Contact 2902002. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 2902002?
For 2902002, mounting is given as DIN rail mounting. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2902002, which weight entry should be checked?
The weight entry quoted above is 67.7 g. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 2902002 before ordering?
Match the catalog number 2902002 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2902002?
Send the full catalog number 2902002, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2902002.